Operation - Sharp FP-J50J-W Operation Manual

OPERATION

START/STOP
START
CLEAN ION SHOWER
The main unit releases Plasmacluster ions with strong airflow and collects dusts while decreasing static electricity
for 10 minutes. After that, the DUST sensor sensitivity is automatically increased and quickly detects impurities
and clean the air powerfully for 50 minutes.
FAN SPEED
AUTO SLEEP MED
OFF TIMER
Select the length of time you want, with the main unit on. The main unit automatically stops once the selected
time is reached.
(with the main unit ON)
STOP
NOTE
• The Plasmacluster Ion can not be turnes "OFF".
• When the operation finishes, the main unit will return to the prior
operation mode.
It is able to change the other mode and
NOTE
AUTO
The fan speed is automatically controlled depending on the 3
detection. (Dust / Odor / Light)
SLEEP
The main unit will operate very quietly, and the fan speed is
automatically switched depending on the amount of impurities in the
air and room brightness.
MAX
Cleanliness Monitor/Plasmacluster Ion Light go off automatically.
Even though the indicator is off, Plasmacluster Ion is dispersed into
air unless Plasmacluster Ion is turned off by
2h 4h 8h
2hour 4hour 8hour
8
• Select the desired fan speed.
• When the main unit starts operation, the operation
starts in the previous mode it was operated in.
(Except CLEAN ION SHOWER mode)
OFF
CANCELLATION
during this mode.