Download Print this page
Boss ME-70 Training Manual

Boss ME-70 Training Manual

Guitar multi-effects
Hide thumbs Also See for ME-70:

Advertisement

BOSS ME-70 GUITAR MULTI-EFFECTS
TRAINING GUIDE
Contents
4. FIVE FEATURES TO KNOW and SHOW

Advertisement

loading
Need help?

Need help?

Do you have a question about the ME-70 and is the answer not in the manual?

Questions and answers

Summary of Contents for Boss ME-70

  • Page 1: Table Of Contents

    BOSS ME-70 GUITAR MULTI-EFFECTS TRAINING GUIDE Contents 1. FEATURES 2. QUICK DEMO 3. GOING DEEP 4. FIVE FEATURES TO KNOW and SHOW 5. ACCESSORIES 6. ME-70 EFFECTS...
  • Page 2: Features

     Modulation and Delay effects support tap tempo  72 programs-36 user, 36 preset  Built-in assignable Expression pedal  Built-in chromatic tuner  Tough metal case  Runs on batteries (included) or optional BOSS PSA-120S AC adaptor  $418.50 List, $299 MAP...
  • Page 3: Quick Demo

    60 seconds. Before You Start 1. Connect the MONO (L) Gt. AMP output of the ME-70 to the clean channel of a good amp, such as a Roland JC-120 or other pro quality amp. NOTE: It is very important to use a pro-quality guitar amp. Why run a high- end effect through a low-end amp? 2.
  • Page 4 BOSS ME-70 Training Guide 3. Set the OD/DS control knobs to an appropriate setting. (Not suggested settings. For illustration only ) 4. Press the OD/DS PEDAL to turn on the Overdrive. 5. Play some chords or leads. STEP TWO: Add Modulation 1.
  • Page 5 BOSS ME-70 Training Guide 2. Set the MODULATION Controls knobs to an appropriate setting. (Not suggested settings. For illustration only) 3. Press the MOD PEDAL to turn on the Modulation effect. 4. Play some chords or leads. STEP THREE: Add Delay...
  • Page 6 BOSS ME-70 Training Guide 2. Set the DELAY Control knobs to an appropriate setting. (Not suggested settings. For illustration only ) 3. Press the DELAY PEDAL. 4. Play some chords or leads. 5. Hold the DELAY PEDAL down for two seconds.
  • Page 7 BOSS ME-70 Training Guide STEP FOUR: Add PEDAL FX 1. Turn the EXPRESSION knob to select WAH. 2. Press the toe end of the EXPRESSION PEDAL hard to turn on the WAH. The PEDAL FX LED will light. 3. Play some chords or leads using the WAH.
  • Page 8 BOSS ME-70 Training Guide 4. When you’re finished with the first loop, press the DELAY PEDAL. The Phrase will play back. NOTE: Make sure you do this on the beat. 5. Change the guitar’s tone using the NUMBERED (FX) PEDALS.
  • Page 9: Going Deep

    BOSS ME-70 Training Guide 3. GOING DEEP How to Switch to Memory Mode 1. Press the MOD and DELAY PEDALS down simultaneously. The BANK number will appear in the LED display. 2. Press both pedals down again or press EXIT to return to Manual Mode.
  • Page 10 BOSS ME-70 Training Guide How to Use EZ TONE EZ-TONE is a set of preset effects. Each effect in the ME-70 comes with an optimized pre-made setting. These are useful for quick patch setups when you want to get a good sound without having to dial in every parameter of ever effect.
  • Page 11: Accessories

    BOSS ME-70 Training Guide 4. FIVE THINGS TO KNOW and SHOW 1. Easiest to use BOSS multi-effect. Just turn the knobs! 2. COSM modeled Amps, OD/DS, Modulations, and Delays 3. Tap tempo both Mod and Delay 4. Tough metal case 5.
  • Page 12: Effects

    BOSS ME-70 Training Guide 6. ME-70 EFFECTS PREAMP 1. CLEAN 2. COMBO 3. TWEED 4. STACK 5. LEAD STACK 6. R-FIER 7. 4-Band EQ COMP/FX 1. COMPRESSOR 2. T-WAH UP 3. T-WAH DOWN 4. SLOW GEAR 5. DEFREETER 6. Single>Hum (Pickup Simulator) 7.
  • Page 13 BOSS ME-70 Training Guide DELAY 1. 1-99ms 2. 100-999 ms 3. 1000-6000ms 4. ANALOG 5. MODULATE 6. REVERSE 7. CHO+DELAY 8. MOMENTARY 9. TAP 10. PHRASE LOOPER PEDAL EFFECTS 1. WAH 2. VOICE 3. +1 OCTAVE 4. –1 OCTAVE 5. MOD RATE 6.
Save PDF