Table of Contents
Advertisement
match the state you have set with
[M], the 232 Monitor Plus will begin
capturing data.
SHIFT 1 BIT RIGHT [4]
This key shifts all data in the capture
buffer one bit to the right. This
option is useful in conjunction with
FORCE CAPTURE.
SHIFT LOCK
A toggle switch that locks the shift
switch (SHIFT) on. Press SHIFT
LOCK again to disengage.
SHUTDOWN
To execute a proper power-down-
and-off procedure, press
SHUTDOWN and then STOP to
turn the 232 Monitor Plus off. This
option ensures the preservation of
the Monitor Plus memory and
option settings.
Table 1. START/STOP Key and its related functions.
Press START/STOP while...
• in the Help Menu or in a detail help
screen
• performing a BERT test
• in the Configure Menu
• in the Output Menu
• in Timer Menu
• in terminal emulation
• printing
CHAPTER 2: View Mode
NOTE:
The 232 Monitor Plus can be set to turn
itself off automatically. See Auto Off in
the Configure Menu.
SRCH RD STRING 1 [Z]
This option immediately searches
contents of the RD capture buffer,
looking for a match of string1 and
places the cursor on that character.
Press STATUS to view the location
found.
SRCH TD STRING 1 [S]
This option immediately searches
contents of the TD capture buffer,
looking for a match of string1 and
places the cursor on that character.
Press STATUS to view the location
found.
START/STOP
Use the START/STOP key to begin
and end a variety of activities on the
232 Monitor Plus. Table 1 below
and the 232 Monitor Plus will...
• leave Help Menu and re-enter View
Mode.
• end the test.
• return to View Mode.
• begin outputting
• begin/end timer function.
• return to View Mode.
• stop printing.
23
Advertisement
Table of Contents
