Table of Contents
Advertisement
Pattern
Passes
PGUP,PGDOWN,END,HOME & arrows to set
values, [START/STOP] to continue
Pattern
The test pattern you want to output.
Hex 00-FF
String1
Spaces (00)
String2
Mark (FF)
Hex Rpt
Fox
Hex Rpt+Signl
Fox2
Help Rpt
The hex report and the help report
are formatted reports. The hex
report outputs the entire contents of
the data buffer in hex notation and
ASCII text; see Appendix D for a
sample printout. The help report
prints the online help system.
Passes
integer
How many times, total, would you
like to send the pattern?
Handshake
Choose the type of handshaking
desired.
[Start/Stop]
Handshake
Screen 3. Report type and parameters.
RD Buffer
TD buffer
ASCII set
511 BERT
Enter any
up to 255
Off, XON/XOFF,
CTS, DSR
CHAPTER 2: View Mode
Press the key labeled START/STOP
to begin or end execution.
← →
The left arrow key (←) stops output;
the right arrow key (→) starts
output.
[STOP]
Press STOP to end output.
RESET/SHUTDOWN
Returns you to View Mode from
anywhere in the Monitor Plus. This
is useful when you want to return to
View Mode quickly. It is also used to
turn off the Monitor Plus.
After pressing RESET/SHUTDOWN,
you will see a screen telling you to
press the [START/STOP] key to
complete a proper power-down, or
to press any other key to continue.
SAVE CONFIG [Y]
The 232 Monitor Plus allows you to
save up to three sets of system
parameters.
NOTE:
You can also reset the parameters to the
21
Advertisement
Table of Contents
