Troubleshooting - Nature Power 37750 User Manual

PROBLEM
Red LED is on,
alarm sounds,
and/or inverter
does not function.
Device does not
operate properly
when first connected
to the inverter.

TROUBLESHOOTING

POSSIBLE CAUSE
Poor contact at terminals.
Connections are reversed.
Fuse is blown.
Over voltage protection
Overload protection
The inverter may not
have the required capacity
to operate the device.
Page
REASON/SOLUTION
Check for poor connection to
battery or power supply. Make
sure connection points are clean.
Rock clamps back and forth for a
better connection.
Unplug the inverter and reverse
the clamps.
See inverter Fuse B
See LED Indicator and Shutdown
Protection section.
Turn the inverter switch OFF
and ON, to reset the inverter. If
device still does not operate, the
inverter should not be used with
this device. Use a higher capacity
inverter or lower rated device.
of 12
ct