Nature Power 37750 User Manual page 4

• ON/OFF rocker switch
• LED indicator
Green indicates Power ON
Red indicates Overload/Interruption
in power
• 12 Volt power cord
• 120V standard AC outlets x2
• USB port – 5V, 2.0A
The inverter and power source must be in
the OFF mode.
IMPORTANT: Make sure to connect your
inverter only to a 12 volt power supply.
CONNECTING INVERTER CABLES TO
THE INVERTER
1. Locate the Positive and Negative
terminals on the right side of the inverter
2. From the POSITIVE (RED) and the
NEGATIVE (BLACK) terminals, remove
A
CONNECTING INVERTER CA
Page
R
• High-speed cooling fan
To keep the inverter cool, the fan turn on
depend on the load on the inverter or
temperature in the inverter. The fans do
not run when the inverter is turned off.
• Positive Battery Cable Terminal (Red)
• Negative Battery Cable Terminal
(Black)
ES
Place the POSITIVE (RED) ring
3.
connector onto the POSITIVE
(RED) inverter terminal. Place the
NEGATIVE (BLACK) ring connector
onto the NEGATIVE (BLACK)
inverter terminal.
4.
top of each ring connector. Put a hex
nut over these and tighten.
of 12