Table of Contents
Advertisement
SET MENU
You can change the pre-set machine settings and make manual adjustments to the automatic functions in the SET Menu. Open
the menu by touching the SET Menu icon (A). To activate a function, touch to place an X in the box. To cancel the function,
touch again to leave the box empty. For some functions, a pop-up window opens for further selection. Touch the SET Menu
icon again to close the SET Menu.
Twin Needle
If you are using a twin needle, set the size of the needle to
limit the width of all stitches and prevent needle breakage.
Touch the twin needle function to open a pop-up window.
Touch the box next to the twin needle size you are using to
make your selection.
Your setting will be saved also when the machine is turned off.
A pop-up message reminds you of the setting when you turn
on the machine. Close the pop-up message by pressing OK.
Note: You cannot set the twin needle size if the Stitch Width Safety
is on, or turn on the Stitch Width Safety if the machine is set for twin
needle.
Stitch Width Safety
Touch to turn on the Stitch Width Safety when using a straight
stitch needle plate or a straight stitch presser foot (optional
accessories).
The stitch width will be limited to zero for all stitches to
prevent damage to the needle, presser foot and needle plate.
This setting is saved when the machine is turned off. A pop-
up message reminds you of the setting when you turn on the
machine.
FIX Auto
Touch to turn on or off the automatic FIX function in the
beginning of each stitch. The settings is saved when turning
off the machine.
Thread Cutter Auto
The Thread Cutter will automatically cut the threads after
a buttonhole or eyelet is sewn. Touch to turn off the cut
function. The setting is saved even if the machine is turned
off.
Audible Alarm
Turns on or off all alarm sounds of the machine. Default
setting is on. The setting is saved even if the machine is turned
off.
Contrast
Touch to open a window to adjust the contrast of the
TouchSceen. Confirm the adjustment by touching OK
The value can be set between –20 to 20 in steps of 1. The
setting is stored even when the machine is turned off.
A
OPERATING YOUR SEWING MACHINE – 25
Advertisement
Table of Contents
