Advertisement
MIDWAY
CABINET
Assembly
Guide
Step 3.
Refer to the drilling measurements on the following
page and drill holes 5/16" (8mm) x 1/2" (13mm) deep at
the positions shown in the end panel.
(Ensure that the holes are drilled accurately.)
Page 1
Worktop Thickness
7/8" (22mm)
1 3/16" (30mm)
1 1/2" (38mm)
1 9/16" (40mm)
3 1/8" (80mm)
11/16"
(18mm)
3/4"
(19mm)
13/16"
(20mm)
For Internal Use: 50-WKIN00110_MIDWAY_CABINET_Assembly_Rev1.indd
It is important to be as accurate
End Panel Height
30" / 36" / 42" Wall Cabinet
18 13/16" (476mm)
18 7/16" (468mm)
18 1/8" (460mm)
18 1/16" (458mm)
16 7/16" (418mm)
Step 1.
See table above and find required end panel height for
the thickness of worktop used.
Measure the height required and carefully cut both end
panels to the correct size.
(Ensure that both of the end panels are cut square
and accurately on the top edge.)
Step 2.
Measure thickness (mm) of
board of midway cabinet.
as possible.
Advertisement
