Centralized Controller
In step ⑦, connect the communication cords to G1, G2 terminals, and connect
(7)
the neutral wire and live wire to the N, L terminal; connect the ground wire to
position
In step ⑧, locate the controller's rear cover onto the electric box rear cover
(8)
with screw ST4.2 × 9.5 MC.
In step ⑨, connect the wire between touch screen and controller's rear cover.
(9)
3.4 Removal Procedure
4 Display and Working Instructions
on the electric box rear cover. Secure it with screw M4 × 12.
Fig.3.14 Diagram of Removal
Fig.4.1 Main Page
16