Water/Floor Control - Gree CE52-24/F(C) Owner's Manual

(1) Functions of Sleep, Quiet, Auto Quiet, X-Fan, Absence, Rapid and Save can
only be effective when unit is turned on.
(2) When sleep function is on, auto quiet function will be turned on subsequently.
Sleep function will not be effective under auto, fan or floor heating mode.
(3) Absence function can only be turned on in heating mode. When absence
function is on, set temperature is 8℃.
(4) Rapid cool function can only be effective in cool mode. Likewise, rapid
heat function can only be effective in heat mode.
(5) When shield all function is on, other shield buttons will be invalid.
NOTE:
When centralized controller is matching with different units, some functions will
also be different for different unit.

5.4 Water/Floor Control

On the Page of VRF Unit, press the icon of water/floor unit to enter the water/floor
control interface. Press the icon of water/floor unit for 5 seconds to pop up the name set of
the selected indoor unit.
Water/Floor control parameters include water heating control parameter and
floor heating control parameter. It can be switched via
NOTES:
① When there is only one function can be selected (water or floor), it can only
display the water heating or floor heating function interface, and cannot be
switched to another interface;
② Only when it is connected to hot water generator, water heating and floor
heating functions are applicable, the interface can be switched and
displaced according to the above instructions.
25
Centralized Controller
button.