3.2 Wiring Instructions
3.2.1 Wiring Ports
Port print
G1, G2
CAN
Meaning
comm.
port
3.2.2 Power Supply
The centralized controller shall use independent power supply.
The range of input voltage: 100~240 VAC; Frequency range: 50/60Hz
Select power cord according to the following table. Never use the power cord
that is not in compliance with instructions of this manual.
Cord type
Single-cord soft
conductiveunsheathed
cord
(60227 IEC 08)
3.2.3 Connection Method of Multi-VRF (CAN Network)
There are three methods to connect centralized controller with the Multi-VRF
system.
Method 1: Connect with indoor network
Fig.3.4 Centralized Controller Connected with Indoor Network
F1, F2
fire alarm port
Cord standard
IEC 60227-3:2007
A2, B2
【reserved
port】
5
Centralized Controller
A3, B3
L-CAC&Split
unit port
2
Cord size (mm
1.5
L, N
Power
port
)