Gree CE52-24/F(C) Owner's Manual page 42

No. Name
Icon of sheidling
6
status
L-CAC&Split unit
7
registration icon
8 All off button
9 Page turning
L-CAC&Split unit
10
icon
11 All on button
L-CAC&Split unit
12
name
Before using, press the registration icon and enter the registration page.
Register the L-CAC&Split units that are going to be controlled. Centralized
controller can support the control of 36 units at most.
Press and hold L-CAC&Split unit icon for 5S to enter the page of settings. Then
you may set the name and icon for the unit.
L-CAC&Split unit control parameters include general control parameters and
advanced control parameters.
NOTES:
① The functions of group control and engineering setting of the Centralized
controller are only applicable to multi VRF units. L-CAC&Split unit do not have
the above function.
② When in the fuctionof All-central control, all the Mulit-VRF unit and L-CAC&Split
unit are controllered, but L-CAC&Split unit not controllered by advance seting.
If the unit is in shielding status, this icon will be
shown.
Press the icon to enter the registration page for
the unit.
Press the icon to turn off all the units.
Press this icon to turn pages.
Display the current L-CAC&Split unit icon.
Press the icon to turn on all the units. Then units
will run according to memories.
Display the current L-CAC&Split unit name.
39
Centralized Controller
Instructions