Opening Your Trailer; Closing Your Trailer; Attaching The Wheels - Burley Honey Bee Owner's Instruction & Safety Manual

Opening Your Trailer

1. Lift upper frame at rear (Figure 1).
2. Reach through seat for rear frame tube
(Figure 2).
3. Squeeze frame tubes together to click
securely in place (Figure 3).

Closing Your Trailer

1. Remove passengers and cargo, then remove
the tow bar and both wheels.
2. From the front of the trailer, lift the cover
then press the yellow release latches and
pull the rear frame through (Figure 4).
3. Fold flat.
NOTE: Damage to windows can occur if trailer
is folded with wheels installed
WARNING
Care must be taken when folding and unfolding to
prevent finger entrapment

Attaching the Wheels

1. Push in the rubber button on the outside of
the wheel hub (Figure 5).
2. Insert wheel axle into axle receiver, and then
release the button (Figure 6). Pull firmly on
wheel to confirm the axle is fully engaged.
Figure 1
Figure 5
OWNER'S INSTRUCTION & SAFETY MANUAL
Figure 2
Figure 6
BURLEY.COM
Figure 3
Figure 4
5
ENG