Speed Control Pedal [Hst Type Only]; Range Gear Shift Lever (L-M-H) [Hst Type Only] - Kubota L4701 Operator's Manual

INSTRUMENT PANEL AND CONTROLS
(1) Synchro-shuttle shift lever
(2) Clutch pedal
IMPORTANT :
• The synchro-shuttle shift lever may be shifted
while the tractor is moving slowly and the
clutch is depressed, but sudden gear shifting
may cause transmission damage.
NOTE :
• When you stand up from the operator's seat
with the synchro-shuttle
"FORWARD" or "BACKWARD", the engine will
stop regardless of whether the machine is
moving or not. The engine stop is because the
tractor is equipped with operator-presence-
control system (OPC).
12. Speed control pedal [HST type
only]
WARNING
To avoid personal injury or death:
• Do not operate if the tractor moves on level
ground with foot off of the speed control pedal.
• Consult your local KUBOTA Dealer.
• Forward pedal
Depress the speed-control-pedal with the toe of
your right foot to move forward.
• Reverse pedal
Depress the speed-control-pedal with the heel of
your right foot to move backward.
38
(A) Forward
(B) Neutral position
(C) Reverse
shift lever
FOOT CONTROLS AND HAND CONTROLS
(1) Speed control pedal
(2) Stopper bolt
IMPORTANT :
• To prevent serious damage to the HST, do not
adjust the stopper bolts.
NOTE :
• When you stand up from the operator's seat
with the speed-control-pedal stepped on or the
cruise-control-lever engaged on, the engine will
stop regardless of whether the tractor is moving
at
or not. The engine stop is because that the
tractor is equipped with the operator-presence-
control system (OPC).
13. Range gear shift lever (L-M-H)
[HST type only]
You can shift the range gear only when the tractor is
completely stopped and the speed-control-pedal is the
neutral position.
(A) Forward
(B) Reverse
L4701