Kubota L4701 Operator's Manual page 56

OPERATING THE ENGINE
5. Place the PTO-clutch-control-switch in the "OFF"
position.
(1) PTO clutch control switch
6. Place the position-control-lever and the draft-
control-lever if equipped in the "FLOAT" position.
The "FLOAT" position is the lowest position of
position-control-lever and draft-control-lever.
(1) Position control lever
(2) Draft control lever (if equip-
ped)
7. Set the hand-throttle-lever to about 1/2 way.
(1) Hand throttle lever
(2) Foot throttle
52
(A) Push
(B) On (Engaged)
(C) Off (Disengaged)
(A) Down
(A) Increase
(B) Decrease
8. Insert the starter key into the key switch and turn it
"ON".
(A) Off
(B) On
9. Check the Easy Checker
™
(See Easy Checker
(1) Electrical charge indicator
(2) Parking brake indicator
(3) Engine oil pressure warning
indicator
NOTE :
• Some of the Easy Checker
up depending on the positions of the levers
and switches.
• Turn on the key switch, and some of the
indicators on the instrument panel stay on
about 1 second.
10. Turn the starter key to the "START" position and
release it when the engine starts.
IMPORTANT :
• Because of safety devices, the engine will
not start except the following conditions:
– PTO-clutch-control-switch is placed in
the "OFF" position.
– Speed-control-pedal is placed in the
"NEUTRAL" position.
(C) Start
™
lamps.
lamps on page 31)
(4) Glow plug indicator
™
lamps may light
L4701