Table of Contents
Advertisement
2 Introduction
The Layer N SP-014 Process Monitoring Smart Probe provides an easy way to integrate process signals to your Layer N
Ecosystem. The SP-014 accepts standard process signals through its M12 5-pin connector and Layer N Smart Interfaces
through its M12 8-pin connector. The optional M12.5-S-M-FM connector can be utilized to easily connect wire leads to your
SP-014. Each of the 3 process inputs may be independently configured as 0-24 mA or 0-1.0 V
The Layer N SP-014 features 2 configurable digital I/O pins. These can be used for a myriad of applications including driving
relays, physical alarms, or sensing dry contacts like door switches. The SP-014 can also be utilized as an edge controller, with
autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor
inputs.
Included with your SP-014
SP-014 Unit
•
•
Quick Start Guide
Additional Material Needed
•
Layer N Smart Interface\Computer with Windows OS
SYNC configuration software
•
Optional Materials
•
M12.5-S-M-FM Screw Terminal Accessory
inputs.
DC
6 |
P a g e
Advertisement
Table of Contents
