Table of Contents
Advertisement
Do Not put hands or feet near the rotating auger. Auger contact can
result in serious injury or even death. Stay away until all motion has
stopped and the snow blower is securely blocked up before removing
material, performing service, and making repairs.
•
Ensure the deflector chute shield is in good
condition.
•
Ensure drum UHMW is not damaged and
drum rotates freely.
•
Ensure the drive chain shield is in place and in
good repair.
•
Ensure the tractor PTO master shield is in
place, lowered and in good condition.
•
Inspect that the chute cable is not excessively
frayed or worn out. OPS-SB-0028_C
•
Perform scheduled lubrication as specified in
the Maintenance Section.
•
Inspect the oil level in gearbox and replenish if
needed. A low oil level is a warning sign that
the gearbox may be cracked or its seal is
damaged and needs to be replaced.
•
Ensure all gearbox vents are in place and free
from clogs.
•
If the fan must be removed from the gearbox,
antiseize must be added to the shaft prior to
installation. OPS-SB-0029_A
Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked up
to prevent sudden or inadvertent falling which could cause serious
injury or even death.
RDX-117 06/20
© 2020 Alamo Group Inc.
OPERATION
(SG-14)
Operation Section 4-16
(SSB-5)
Advertisement
Table of Contents
