Table of Contents
Advertisement
Allow sufficient clearance for the Implement to swing outward while turning. Implements
carried behind the Tractor will swing outside the tire path when making turns. Contacting a
solid object while turning will cause equipment damage and possible injury.
Perform turns with the tractor and snow blower at
slow speeds to determine how the tractor with the
attached
implement
handles
operating the snow blower the overall working
length of the unit is increased. Allow additional
clearance for the rock picker when turning. Extra
precaution should be taken to avoid hitting parked
vehicles, sign, road structures, bystanders, and
animals due to the overall length and width of the
implement.
To avoid overturns, drive the tractor with care and at
safe speeds, especially when operating over rough
ground, crossing ditches or slopes, and turning
corners. Rear tractor tire spacing should be
increased when working on inclines or rough
ground to reduce the possibility of tipping.
Use extreme caution when operating on steep
slopes. Keep the tractor in a low gear when going
downhill. DO NOT coast or free-wheel downhill.
Do not let the auger turn when the implement is raised
for any reason, including clearance or for turning.
Raising the implement exposes the auger which
creates a potentially serious hazard and could cause
serious injury or even death from objects thrown from
the auger.
RDX-117 06/20
© 2020 Alamo Group Inc.
OPERATION
a
turn.
When
Operation Section 4-22
(S3PT-20)
Advertisement
Table of Contents
