Info Menu - Epson EH-TW5750 User Manual

Configuration Menu
Function
Operation Direct Power
On
Sleep Mode
Sleep Mode
Timer
Illumination
High Altitude
Mode
Auto Source
Search
Log Save Des-
tination
-
Language
Reset Yes, No

Info menu

Function
Projector Info
Menu/Settings
On, Off
On, Off
1 to 30 mins.
On, Off
On, Off
On, Off
Internal Memory, USB and
Internal Memory
Menu/Settings
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
3D Format
Sync Info
Color Depth
Status
Serial Number
Sets up the projector so that projection starts as
soon as the power cord is plugged in without any
button operations.
Note that when this is set to On, projection starts
if power is restored after a blackout or other
power outage and the power cord is still plugged
into the projector.
If the set time is exceeded and no signal is input,
the projector is automatically turned off and en-
ters standby mode. When in standby mode,
press the standby button on the remote control
or the control panel to start projection.
Sets the interval for Sleep Mode.
Set this to Off if the light from the indicators on
the control panel bother you when watching a
movie in a dark room.
Set this to On if you are using the projector above
an altitude of 1500 meters.
Set to On to detect the input signal automatically
and project images when there is no input signal.
Sets where you want to save the logs.
Selects the display language.
Resets all Extended settings except for Projec-
tion, High Altitude Mode, Auto Source
Search, and Language.
Explanation
Displays the cumulative lamp operating time.
Displays the current input source.
Displays the input signal format of the current input source.
Displays the resolution.
Displays the scan mode.
Displays the refresh rate.
Displays the 3D format of the signal input during 3D projec-
tion (Frame Packing, Side by Side, or Top and Bottom).
Displays the image signal information.
This information may be needed if service is required.
Displays the color depth and color difference.
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Displays the projector's serial number.
56
Explanation