Setting Frame Interpolation; Setting The Image Processing Speed - Epson EH-TW5750 User Manual

Adjusting the Image
a
Press the [Menu] button to display
menus in the order Image - Auto Iris.
Remote control
c
Depending on the image, you may hear the Auto Iris operating, but this is not a malfunction.

Setting Frame Interpolation

You can play fast moving images smoothly by automatically producing intermediate frames between the
original frames.
Frame Interpolation is available under the following conditions.
• When Image Processing is set to Fine. s Signal - Advanced - Image Processing
• Image Preset Mode is set to anything other than Off. s Image - Image Enhancement - Image Preset Mode
• When the source is HDMI1 or HDMI2.
• When inputting 2D signals or 3D signals (1080p 24 Hz). s
a
Press the [Menu] button to display
menus in the order Image - Image
Enhancement - Frame
Interpolation.
Remote control

Setting the Image Processing Speed

Improves the response speed for images projected at high-speed, such as games.
This is only available when receiving a progressive signal input from the HDMI1 or HDMI2 ports.
Control panel
Control panel
35
b
Use the up and down buttons to select
the item, and then press the [Enter]
button to confirm the selection.
p.52
p.77
b
Use the up and down buttons to select
the item, and then press the [Enter]
button to confirm the selection.
p.51