Preparing; Installing; Projected Image And Position Of Projector; Installing In Parallel With The Screen - Epson EH-TW5750 User Manual

Preparing

Installing

Projected Image and Position of Projector

Install the projector as follows.

Installing in parallel with the screen

If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image.
Adjust the projector's position so that it is installed in parallel with the screen.
c
If the projector cannot be installed in parallel, use one of the following methods to adjust the
projected image.
•
Correct distortion in the image using the horizontal keystone adjuster or H/V-Keystone
•
Adjust the position f the projected image using lens shift

Installing the projector horizontally by adjusting the height of either side

If the projector is tilted, the projected image is also tilted.
Install the projector horizontally so that both sides are at the same height.
If the projector cannot be installed horizontally, you can adjust the projector's tilt with the rear feet.
p.27
s
13
p.28
s
p.27
s