Epson EH-TW5750 User Manual page 55

Configuration Menu
Function
HDMI Link Device Connections -
HDMI Link
Audio Out Device
Power On Link
Power Off Link
Bluetooth Search Bluetooth
Device
Bluetooth Audio
Connected Device
Lock Setting Child Lock
Control Panel Lock
Menu/Settings
On, Off
Projector, AV Sys-
tem
Off, Bidirectional,
Device -> PJ, PJ ->
Device
On, Off
-
On, Off
-
On, Off
Full Lock, Partial
Lock, Off
54
Explanation
Displays a list of devices connected to the
HDMI ports.
Enables or disables the HDMI Link function.
Selects which device outputs audio.
Sets the link function when the power is turned
on.
•
To turn on the projector when you operate the
connected device, select Bidirectional or De-
vice -> PJ.
•
To turn on the connected device when you turn
on the projector, select Bidirectional or PJ ->
Device.
Sets whether or not to power off connected de-
vices when the projector is turned off.
Searches for available Bluetooth devices and dis-
plays them as a list.
Enables or disables audio output from Bluetooth
audio devices.
Setup cannot be performed in the following ca-
ses.
•
When the source is USB
•
When Audio Out Device from the HDMI Link
menu is set to AV System
Displays information on the connected Blue-
tooth audio device.
This locks the standby button on the projector's
control panel to prevent children from turning
on the projector by accident. You can turn on the
power when locked by holding down the stand-
by button for approximately three seconds. You
can still turn off the device using the standby
button or perform operations with the remote
control as usual.
If changed, this setting is enabled after you pow-
er off the projector and the cool-down process is
complete.
Note that even if Child Lock is set to On, the pro-
jector still turns on when the power cord is con-
nected if Direct Power On is set to On.
Full Lock: Disables all of the projector's buttons.
Partial Lock: Disables all of the projector's but-
tons except for the standby button.
is displayed on the screen if buttons are
pressed while the projector is locked. To unlock,
press and hold the standby button on the control
panel for at least 7 seconds.
If changed, this setting is enabled once you close
the Configuration menu.
p.46
s