Basic Operations
d
Sets the 3D function.
e
Selects the Color Mode.
c
The Home screen disappears after 10 minutes of inactivity.
Turning Off
a
Turn off the connected equipment.
b
Press the standby button on the
remote control or the control panel.
Remote control
A confirmation message is displayed.
c
Press the standby button again.
The status indicator flashes and the
projector begins to cool down.
Signal - 3D Setup
p.52
s
p.32
s
Control panel
d
Wait until cool-down is complete.
When cool-down is complete, the status
indicator stops flashing.
e
Disconnect the power cord.
c
•
If the power cord is connected,
some electricity is consumed
even if no operations are made.
•
When connecting the power cord
again, wait a sufficient time
interval.
f
Close the lens cover.
25