Bluetooth Device Problems - Epson EH-TW5750 User Manual

Troubleshooting
Check
Does the connected device meet the HDMI
CEC standards?
Are the cables connected correctly?
Is the power for the amplifier or DVD recorder
and so on turned on?
Was a new device connected, or was the con-
nection changed?
Are many multi-media players connected?
The device name is not displayed under Device Connections
Check
Does the connected device meet the HDMI
CEC standards?

Bluetooth device problems

Cannot Connect Bluetooth Device
Check
Was a device search performed?
Does the device support copyright protection
(SCMS-T)?
Is the device based on A2DP?
The audio and connection for the Bluetooth device disconnects
Check
Are there any obstacles between the projec-
tor and the Bluetooth device?
Is the device connected within the specified
communication distance?
If the connected device does not meet the HDMI CEC standards,
it cannot be operated even if it is connected to the HDMI port.
See the documentation and so on supplied with the connected
device for more information.
Also, check if the device is available under Device Connec-
tions. p.47
s
Check that all the cables required to use HDMI Link are securely
connected. p.46
s
Put each device in standby status. See the documentation and
so on supplied with the connected device for more information.
If you have connected a speaker and so on, set the connected
equipment to PCM output.
If the CEC function for a connected device needs to be set again,
for example when a new device is connected or the connection
is changed, you may need to restart the device.
Up to 2 multi-media players that meet the HDMI CEC standards
can be connected at the same time.
If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
When connecting a Bluetooth device for the first time, or when
changing to another Bluetooth device, perform Search Blue-
tooth Device. p.19
s
You cannot connect a Bluetooth device that does not support
copyright protection (SCMS-T).
You cannot connect a Bluetooth device that does not support
A2DP.
Check for any obstacles between the projector and the Bluetooth
device, and change their positions to improve communication.
If the distance between the projector and the Bluetooth device
exceed 10 m, the connection may be lost. Move the Bluetooth
device closer to the projector.
68
Remedy
Remedy
Remedy
Remedy