PXM PxArt+ XL Mono Ceiling User Manual

Hide thumbs Also See for PxArt+ XL Mono Ceiling:

Advertisement

Quick Links

PX803-C
PxArt+ XL Mono Ceiling
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PxArt+ XL Mono Ceiling and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PXM PxArt+ XL Mono Ceiling

  • Page 1 PX803-C PxArt+ XL Mono Ceiling User manual...
  • Page 2: Table Of Contents

    8 DMX signal connecting................15 9 Connection scheme.................16 10 Dimensions.....................17 11 Technical data..................18 Manufacturer reserves the right to make modifications in order to improve device operation. PXM Marek Żupnik sp.k. Podłęże 654 tel. +48 12 385 83 06 32-003 Podłęże mail: info@pxm.pl Rev.1-0 BDO register number 000005972 www.pxm.pl...
  • Page 3: Description

    Description PX803-C is a professional LED illuminator designed to illuminate museum or exhibition displays. By using semiconductor light sources SSL LED COB type and advanced control electronics, a high-class illuminator has been created that meets very high requirements concerning museum and exposition lighting. Its most advantages include the total lack of ultraviolet radiation, trace amounts of infrared radiation, very high CRI color rendering index, high brightness and low energy consumption.
  • Page 4: Safety Conditions

    Safety conditions Caution! Before installing, connecting and using the lamp you have to absolutely read this document. The following symbols are used to underline important information on security on the product and in this manual. Danger! Warning! Warning! Warning! Warning! Risk of loss of life Fire hazard LED light emission,...
  • Page 5 The PX803-C device is powered directly from 230V power grid. Failure to comply with the safety rules may result in electric shock and may endanger the user’s life. Therefore it is necessary to observe the following: 1. Installation should be performed by a person holding the appropriate qualifications, according to the instruction manual.
  • Page 6: Connectors And Control Elements

    Connectors and control elements Brightness adjustment PX277 parameter programming connector Information on version The PX803-C lamp is available in several versions that differ, for example, in the angle of the lenses used. Below is a description of the PX803-C markings and their explanation: PX803-C –...
  • Page 7 XX – reflector angle: 15 – 15° 36 – 36° 51 – 51° YYY – CRI and color temperature: X30 – CRI 95, temp. 3000K 930 – CRI 90, temp. 3000K 950 – CRI 90, temp. 5000K 830 – CRI 80, temp. 3000K 850 –...
  • Page 8: Control

    Control 5.1 Button The lamp has been equipped with button which allow for changing the brightness level. The button have been placed at the bottom part of the junction box, above the lamp reflector. Depending on a situation, the diode signal the following: •...
  • Page 9: Dmx Signal

    the control button for a moment. The diode will signal the change of adjustment direction. The pressing of the adjustment button again will cause the dimming of the lamp (brightness decrease). While the lamp operates, the diode stays switched off (excluding situations mentioned above).
  • Page 10: Available Parameters

    6.1 Available parameters DMX Addr. – changing the DMX address of the color temperature and brightness channel in the range 1 – 512, No Signal – behavior of the device when the DMX signal disappears: Scene – setting the scene displayed when the DMX signal disappears, •...
  • Page 11 Control Mode: 1ch MONO • Firmware version – software version, Serial Number – serial number.
  • Page 12: The Px803-C Menu Diagram In Px277

    6.2 The PX803-C menu diagram in PX277 PX803-XL PX803-XM PX803-XS PxArt+ XL MONO PxArt+ XM MONO PxArt+ XS MONO NEXT ENTER DMX Addr. DMX Addr. 001 (1ch) 001 (1ch) * NEXT NEXT DMX Addr. 512 (1ch) * ENTER No Signal No Signal Channel: 1 Off *...
  • Page 13: Rdm - Available Parameters

    RDM – available parameters The PX803-C supports the DMX-RDM protocol. DMX protocol allows only of a one-way data transmission, while extension the RDM protocol can transmit information in two directions. This makes possibility of monitoring activities of the compatible devices. Thanks to RDM some available settings of compatible devices may be programmed using this protocol.
  • Page 14 Parameter name Description FACTORY_DEFAULTS 0x0090 device default settings PERSONALITY * 0x00E0 DMX operational mode PERSONALITY_ description of individual 0x00E1 DESCRIPTION operational modes information on the selected SENSOR_DEFINITION 0x0200 temperature sensor SENSOR_VALUE 0x0201 information about sensors SMOOTH_OFF/1/2/3/4 * 0x801A selection of smoothing options NO_SIGNAL_OFF/ON/HLD/S behavior of the device when the 0x801C...
  • Page 15: Dmx Signal Connecting

    DMX signal connecting PX803-C must be connected to the DMX line in series, without branching on the control cable. This means that the control cable should be connected to the DMX pins in the PX803-C, and then from the DMX pins to the next DMX receivers (diagram below).
  • Page 16: Connection Scheme

    Connection scheme DMX controller 230V AC PX803-C PX803-C Max. 32 devices on the line PX803-C Terminator (120 Ohm resistor)
  • Page 17: Dimensions

    10 Dimensions...
  • Page 18: Technical Data

    11 Technical data type PX803-C power supply 230V AC number of LEDs 1 (COB) power PX803-C-XL: 26W PF (power factor) 0.94 max. increase of the housing temperature +50°C color rendering index CRI min. 80 lifetime of diodes 50000h reflector angles 15°, 36°, 51°...
  • Page 19 Podłęże, 04.11.2020 DECLARATION OF CONFORMITY PXM Marek Żupnik spółka komandytowa Podłęże 654, 32-003 Podłęże we declare that our product: Product name: PxArt+ XS / XM / XL Mono Ceiling Product code: PX803-C meets the requirements of the following standards, as well as harmonised...

This manual is also suitable for:

Px803-c

Table of Contents