8 DMX signal connecting................14 9 Connection scheme.................15 10 Dimensions.....................16 11 Technical data..................17 Manufacturer reserves the right to make modifications in order to improve device operation. PXM Marek Żupnik sp.k. Podłęże 654 tel. +48 12 385 83 06 32-003 Podłęże mail: info@pxm.pl Rev.1-0 BDO register number 000005972 www.pxm.pl...
Description PxArt+ Mono Ceiling is a professional LED illuminator designed to illuminate museum or exhibition displays. By using semiconductor light sources SSL LED COB type and advanced control electronics, a high-class illuminator has been created that meets very high requirements concerning museum and exposition lighting. Its most advantages include the total lack of ultraviolet radiation, trace amounts of infrared radiation, very high CRI color rendering index, high brightness and low energy consumption.
Safety conditions Caution! Before installing, connecting and using the lamp you have to absolutely read this document. The following symbols are used to underline important information on security on the product and in this manual. Danger! Warning! Warning! Warning! Warning! Risk of loss of life Fire hazard LED light emission,...
Page 5
The PX709-C device is powered directly from 230V power grid. Failure to comply with the safety rules may result in electric shock and may endanger the user’s life. Therefore it is necessary to observe the following: 1. Installation should be performed by a person holding the appropriate qualifications, according to the instruction manual.
Information on version The PX709-C lamp is available in several versions that differ, for example, in the angle of the lenses used. Below is a description of the PX709-C markings and their explanation: PX709-C – XX – UYY – Z XX –...
Control 5.1 Button The lamp has been equipped with button which allow for changing the brightness level. The button have been placed at the bottom part of the junction box, above the lamp reflector. Depending on a situation, the diode signal the following: •...
the control button for a moment. The diode will signal the change of adjustment direction. The pressing of the adjustment button again will cause the dimming of the lamp (brightness decrease). While the lamp operates, the diode stays switched off (excluding situations mentioned above).
6.1 Available parameters Bright. address – changing the DMX address of the brightness channel in the range of 1 – 512 Scene bright. – scene brightness displayed after DMX signal loss Smooth – the smoothing function allows for smooth changes of brightness and color, without visible jerks, which prevents the effects of “vibrations”...
6.2 The PxArt+ Mono Ceiling menu diagram in PX277 Model PX709 NEXT ENTER Bright. address Bright. address NEXT Scene bright. NEXT Bright. address 512 * PREV ENTER Scene bright. Scene bright. 128 * NEXT NEXT ENTER Smooth Smooth Scene bright. Time Time * 255 *...
RDM – available parameters The PX709-C supports the DMX-RDM protocol. DMX protocol allows only of a one-way data transmission, while extension the RDM protocol can transmit information in two directions. This makes possibility of monitoring activities of the compatible devices. Thanks to RDM some available settings of compatible devices may be programmed using this protocol.
Page 13
Parameter name Description FACTORY_DEFAULTS 0x0090 device default settings DMX_PERSONALITY * 0x00E0 DMX operational mode DMX_PERSONALITY_ description of individual 0x00E1 DESCRIPTION operational modes information on the selected SENSOR_DEFINITION 0x0200 temperature sensor SENSOR_VALUE 0x0201 information about sensors DEVICE_HOURS 0x0400 total lamp operating time LAMP_HOURS 0x0401 total lamp lighting time SMOOTH_DIS_0/P2P_1/...
DMX signal connecting PX709-C must be connected to the DMX line in series, without branching on the control cable. This means that the control cable should be connected to the DMX pins in the PX709-C, and then from the DMX pins to the next DMX receivers (diagram below).
11 Technical data type PX709-C power supply 230V AC number of LEDs 1 (COB) power PF (power factor) 0.94 max. increase of the housing temperature +50°C color rendering index CRI min. 80 lifetime of diodes 50000h reflector angles* 15°, 36°, 51° brightness adjustment range 0 –...
Page 18
Podłęże, 23.09.2020 DECLARATION OF CONFORMITY PXM Marek Żupnik spółka komandytowa Podłęże 654, 32-003 Podłęże we declare that our product: Product name: PxArt+ Mono Ceiling Product code: PX709-C meets the requirements of the following standards, as well as harmonised standards: PN-EN 60598-1:2015-04...
Need help?
Do you have a question about the Mono Ceiling PxArt+ and is the answer not in the manual?
Questions and answers