Powercom Line-Interactive 1025AP User Manual page 11

Waveform (Battery-Mode)
Voltage
Frequency (Battery-Mode)
Transfer Time
Protection
Full Protection
Tele Communication
Battery
Type
Quantity
Sealed, Maintenance Free
Typical Recharge Time
Management & Communication
Indicator
Communication Port
Physical
Dimensions (WxDxH) (mm)
Weight (kgs)
Shipping Dimensions (mm)
Shipping Weight (kgs)
Alarm
Overload / Fault
Battery Mode
Low Battery
Environment
Operating Humidity
Audible Noise
* Specifications are subject to change without further notice.
* Specifications are for reference; actual information should be based on the real product.
© All rights reserved. All trademarks are property of their respective owners.
Simulated Sine Wave
100 / 110 / 120 VAC or 220 / 230 / 240 VAC
50 Hz / 60 Hz ± 1 Hz
Overload, Surge, Short Circuit
12V 7Ah
2
LED Panel, LCD Panel (Option)
8.5
9.7
Continuous Beeping
Beep every 2 seconds
Beep every 0.5 second
0-90 % RH at 0-40°C (Non-condensing)
10
2 - 4 ms (Typical)
RJ11 / RJ45
12V 7.2Ah
2
Yes
3-4 hr to 90%
USB B type
147 x 360 x 164
10.1
233 x 449 x 277
11.3
Less than 40 dB
12V 9Ah
2
11.1
12.3