Dell PowerVault MD3000 Hardware Owner's Manual page 15

Table 1-4. RAID Controller Module Component Functions (continued)
Item Component
4 Battery Fault LED
(amber)
5 Cache Active LED
(green)
6 Controller Fault
LED (amber)
7 Controller Power
LED (green)
8 Ethernet Link LED
(green)
9 Ethernet Connector
10 Ethernet Speed
LED (green)
11 Debug Port
12 SAS Out Port
The RAID controller module connects to the enclosure midplane via the two midplane connectors on its
internal (rear) panel. The RAID controller module is shown in Figure 1-6.
Icon Function
Amber: Battery backup unit or battery has failed.
Amber flashing: Battery is charging or is in startup
self test.
Off: Battery backup unit and battery is operating
normally.
Green: On-board controller memory contains data.
Off: On-board controller memory is empty.
Amber: Controller fault detected.
Off: Controller is operating normally.
Green: Controller power is on.
Off: Controller is not powered.
Green: Ethernet connection is active.
Off: Ethernet connection is not active.
Provide a 10/100 Mbps Ethernet connection for
out-of-band management of the enclosure.
Green: Ethernet connection is operating at
100BASE-T.
Off: Ethernet connection is operating at 10BASE-T
or is not active.
Dell support only.
Out Not used.
About Your System
15