Download  Print this page

Dell PowerVault MD3000 Configuration

Unsupported cabling configurations
Hide thumbs
   

Advertisement

Unsupported Cabling Configurations for the Dell™ PowerVault™
MD3000 Storage Enclosure
The MD3000 documentation contains illustrations showing a server with a single SAS 5/E HBA in a
redundant configuration with two SAS cables connected to the array. These configurations, as shown in
Figure 1, are not supported at this time. Support for these configurations will be added in a later
MD3000 release.
NOTE:
For Dell PowerVault NX1950 storage systems only, the single-HBA host server configuration
(top illustration) in Figure 1 is supported.
Figure 1. Unsupported Redundant Data Paths for Single-HBA Host Servers
single-HBA host server
single-HBA host server
MD3000 RAID Enclosure
single-HBA host server
MD3000 RAID Enclosure
December 2006

Advertisement

Table of Contents
loading

  Related Manuals for Dell PowerVault MD3000

  Summary of Contents for Dell PowerVault MD3000

  • Page 1 Figure 1, are not supported at this time. Support for these configurations will be added in a later MD3000 release. NOTE: For Dell PowerVault NX1950 storage systems only, the single-HBA host server configuration (top illustration) in Figure 1 is supported. Figure 1. Unsupported Redundant Data Paths for Single-HBA Host Servers...
  • Page 2 Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and PowerVault are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their...