Changing Or Deleting The Sequential Broadcast Transmission Program - Konica Minolta bizhub 215 User Manual

7.2 Store Address
3
Use +, to select [PROGRAM DIAL], and press the OK key.
4
Press a target key among One-Touch Dial Key 29 to 32.
% One-touch dial keys 29 to 32 are available when the Switching Plate is opened upward.
5
Use +, to select a target function, and press the OK key.
6
Follow the setting procedure for each function.
% Sequential broadcast transmission (p. 3-13)
% Specified-time transmission (p. 3-23)
% Confidential transmission (p. 4-4)
% Relay instruction transmission (p. 4-9)
% Polling RX (p. 4-8)
Settings are registered.
7
Use +, to select [RETURN], and press the OK key.
This registers settings, and returns to the Store Address screen.
7.2.9

Changing or deleting the sequential broadcast transmission program

1
Press the Utility key.
2
Use +, to select [DIAL REGISTRATION], and press the OK key.
3
Use +, to select [PROGRAM DIAL], and press the OK key.
4
Press the One-Touch Dial Key that contains the sequential broadcast transmission program you want
to change or delete.
5
Use +, to select [EDIT] or [DELETE], and press the OK key.
% If [EDIT] is selected, go to the next step.
% If [DELETE] is selected, the information registered in the program dial is deleted, and the display re-
turns to the Store Address screen.
6
Use +, to select [ADD] or [CHECK/EDIT], and press the OK key.
% If [ADD] is selected, enter a destination, and press the OK key.
% If [CHECK/EDIT] is selected, go to the next step.
7
Use +, to select a target destination, and press the OK key.
% To delete the displayed destination, press the Clear/Stop key, and select [YES] in the displayed
screen.
% Repeat this procedure until checking and correcting a destination is completed. After this, press the
Back key.
8
Select [RETURN], and press the OK key.
This registers settings, and returns to the Store Address screen.
bizhub 215
7
7-12