Incorrect Language Appears On The Display; Printhead Errors - Dell P513w User Manual

•
"Printer is printing blank pages" on page 79
•
"Printer is busy or does not respond" on page 79
•
"Cannot delete documents from the print queue" on page 79
•
"Cannot print through USB" on page 80

Incorrect language appears on the display

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
C
HANGE THE LANGUAGE USING THE PRINTER MENUS
1
From the printer control panel, press
2
Press the arrow buttons to scroll to Defaults, and then press
3
Press the arrow buttons to scroll to Set Defaults, and then press
4
Press the arrow buttons to scroll to Use Factory, and then press
5
Complete the initial printer setup.
C
HANGE THE LANGUAGE USING A BUTTON COMBINATION
)
LANGUAGE
1
Turn the printer off.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold
turn off the printer.
2
Press and hold down
Note: Do not release
reset.
3
Complete the initial printer setup.

Printhead errors

If the "Before you troubleshoot" checklist does not solve the problem, then try the following:
.
and , and then press and release
and until Language appears on the display, indicating that the printer has been
Troubleshooting
.
.
.
(
IF YOU CANNOT READ THE CURRENT
to turn the printer on.
75
for three seconds to