Printing Photos From A Memory Device Using The Printer Software - Dell P513w User Manual

Editing photos using the printer control panel
1
Load photo paper.
2
Insert a memory card or flash drive.
If document files and image files are stored on the memory device, then press
3
From the printer control panel, press
4
Press the left or right arrow button to select the layout of the photo you want to print, and then press
5
Press the left or right arrow button to select a photo for editing and printing.
6
Press the up or down arrow button to scroll to
From here
Brightness
Crop
Auto Enhance
Reduce Red Eye
Rotate
Colorized Effect
Frames
7
Press the arrow buttons to make your selections.
8
Press the up or down arrow button to scroll to
9
Press the up or down arrow button to scroll to
10
If you want to adjust the print settings:
a
Press again.
b
Press the arrow buttons to make your selections.
c
Press to save your selections.
d
Press the up or down arrow button to scroll to Continue, and then press
11
Press the Color/Black button to set a color or black-and-white print.
When you select color or black-only printing, the light near your choice comes on.
12
Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Printing photos from a memory device using the printer software

1
Load photo paper.
2
From the printer control panel, press
3
Insert a memory card or flash drive.
4
Transfer or print the photos:
to select Select and Print.
, and then press
You can
Adjust the brightness of a photo.
Crop a photo.
Enhance a photo automatically.
Reduce the red-eye effect caused by light reflection.
Rotate a photo in 90-degree increments clockwise or counterclockwise.
Select whether to print a photo in black and white, sepia, antique brown, or
antique gray.
Select a frame for the photo.
, and then press
, and then press
.
Printing
31
to select Photos.
.
.
.
.
.