Resetting To Factory Settings - Dell P513w User Manual

To change the temporary settings into new default settings
1
From the printer control panel, press
2
Press the up or down arrow button to scroll to Defaults, and then press
3
Press the up or down arrow button to scroll to Set Defaults, and then press
Use Current appears on the display.
4
Press again to select Use Current.
To disable the settings timeout feature
You can disable the settings timeout feature if you do not want the printer to revert to the default settings after two
minutes of inactivity or after the printer is turned off.
1
From the printer control panel, press
2
Press the up or down arrow button to scroll to Device Setup, and then press
3
Press the up or down arrow button to scroll to Clear Settings Timeout, and then press
4
Press the up or down arrow button to scroll to Never, and then press

Resetting to factory settings

Resetting to factory default settings will delete all the printer settings you have previously selected.
Using the printer control panel menus
1
From the printer control panel, press
2
Press the up or down arrow button to scroll to Defaults, and then press
3
Press the up or down arrow button to scroll to Set Defaults, and then press
4
Press the up or down arrow button to scroll to Use Factory, and then press
5
When prompted to set the initial settings of your printer, make your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.
Using a button combination (if you cannot read the current
language)
1
Turn off the printer.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold
turn off the printer.
2
From the printer control panel, press and hold
Note: Do not release
reset.
.
.
.
and until Language appears on the display, indicating that the printer has been
Using the printer control panel buttons and menus
.
and , and then press and release
16
.
.
.
.
.
.
.
for three seconds to
to turn the printer on.