Applying Configuration; Ready To Provision; Retrieve Device Username And Password; Enter Device Username And Password Into The Phone - Cisco MPP 8832 Setup Instructions

Applying configuration

3
After a few moments, the phone will apply its configuration and finish powering up.

Ready to provision

4
The phone is ready to provision when you see
the account setup screen. Go to the next step
to retrieve your device username and password.

Retrieve device username and password

5
(a) You must go to the self-service portal:
https://vodafone.xport.co.nz/mydevice or scan the QR
code to retrieve the username and password for the phone.
(b) To log into the self-service portal use the login details from
your 'Vodafone One Business Online Portal Login'

Enter device username and password into the phone

6
Enter your device username and password retrieved from the
self-service portal into the phone.
Example format:
Username: 120000#00001 then press Down
Password: 11223344 then press the Sign In softkey button.*
The phone will apply its configuration and power up once more.
* If you enter your device details incorrectly or if a warning message displays as:
"Verify your provisioning settings or contact your service provider", press Cancel.
If "Error with sign in credentials, contact your administrator" appears, press OK.
This should return you to the account setup screen.
If you exit the account setup screen and can no longer sign in, restart the phone
by unplugging the network cable. Allow several minutes.
IMPORTANT:
please follow steps 4 – 6 carefully
Profile account setup (HTTP)
Username
Profile account setup (HTTP)
Username
Password
Password
Option Sign in
Option Sign in
email.