Cisco MPP 8832 Setup Instructions page 2

IP Conference Phone (Cisco MPP 8832)
Set up instructions
Contained in the box
cisco
A
Power over Ethernet
(PoE) Adaptor
Set up videos and user guides can be found here: vodafone.co.nz/vobextras
Connect IP conference phone to power over Ethernet (PoE) adaptor
1
Take the conference phone
plug one end into the USB-C port at the top of the conference phone. Next,
plug the other end of the USB-C cable into the USB-C port on the Power over
Ethernet (PoE) adaptor
Connect IP conference phone to the internet
2
Take network cable
Ethernet (PoE) adaptor
spare PoE port on your switch. If your switch supports PoE, the conference phone
will begin powering up.
B
USB-C Cable
A
.
D
C
and plug it into the NETWORK port on the Power over
A
. Then plug the other end of the network cable into a
A
C
(
please note, cables may vary in colour)
C
Network Cable
(RJ45)
D
out of the box. Then take USB-C cable
B
IP Conference Phone
(Cisco MPP 8832)
A
C C
B
Switch
C
D
B
and