Removing The Drive-Panel Insert - Dell Dimension 9200 Owner's Manual

3 Grasping the lever on the sliding plate, pull the sliding plate to the right and hold in place.
NOTE:
The sliding plate secures and releases the drive panel and helps to secure the drives. Push from the inside
and pivot the drive panel to the left to release the panel from its side hinges.
4 Set the drive panel aside in a secure location.

Removing the Drive-Panel Insert

1 drive panel
1 Turn the drive panel sideways and find the tip of the drive-panel insert tab that latches over a tab on
the right side of the drive panel.
2 Pull the inner tip of the drive-panel insert tab away from the drive panel.
3 Pivot the drive-panel insert out and away from the drive panel.
4 Set the drive-panel insert aside in a secure location.
1
3
2 drive-panel insert tab
2
3 drive-panel insert
Removing and Installing Parts
101