3 Remove the computer cover (see "Removing the Computer Cover" on page 78).
4 Press in on the tabs on each side of the hard drive bracket in the empty drive bay and slide the bracket
up and out.
5 Snap the hard drive bracket onto the new hard drive.
NOTICE:
Do not install any drive into the lower hard-drive bay until you have removed the hard drive bracket from
the inside of the hard drive bay.
6 Slide the new hard drive into empty bay until you feel a click.
1
hard drive
7 Connect the power and hard drive cables to the drive.
8 Check all connectors to be certain that they are properly cabled and firmly seated.
108
Removing and Installing Parts
1
2
2
hard drive bracket