Dell Dimension 9200 Owner's Manual page 44

Migrating to a RAID Level 0 Configuration
1 Set your computer to RAID-enabled mode (see "Setting Your Computer to RAID-Enabled Mode" on
page 39).
2 Click the Start button and point to All Programs→ Intel(R) Application Accelerator→ Intel Matrix
Storage Manager to launch the Intel
NOTE:
If you do not see an Actions menu option, you have not yet set your computer to RAID-enabled mode
(see "Setting Your Computer to RAID-Enabled Mode" on page 39).
3 On the Actions menu, select Create RAID Volume From Existing Hard Drive to launch the
Migration Wizard.
4 Click Next on the Migration Wizard screen.
5 Enter a RAID volume name or accept the default name.
6 From the drop-down box, select RAID 0 as the RAID level.
7 Select the appropriate strip size from the drop-down box, and then click Next.
NOTE:
Select the strip size closest to the size of the average file you want to store on the RAID volume. If you
do not know the average file size, choose 128 KB as your strip size.
8 On the Select Source Hard Drive screen, double-click the hard drive from which you want to migrate,
and click Next.
NOTE:
The source hard drive should be the hard drive containing the data or operating system files that you
want to keep on the RAID volume.
9 On the Select Member Hard Drive screen, double-click the hard drive(s) to select the member
drive(s) to span the stripe array, then click Next.
10 On the Specify Volume Size screen, select the Volume Size you want, then click Next.
NOTICE:
The next step will result in the loss of all data on the member drive.
11 Click Finish to start migrating, or click Back to make changes. You can use your computer normally
during the migration process.
Migrating to a RAID Level 1 Configuration
1 Set your computer to RAID-enabled mode (see "Setting Your Computer to RAID-Enabled Mode" on
page 39).
2 Click the Start button and point to All Programs→ Intel(R) Application Accelerator→ Intel Matrix
Storage Manager to launch the Intel
NOTE:
If you do not see an Actions menu option, you have not yet set your computer to RAID-enabled mode
(see "Setting Your Computer to RAID-Enabled Mode" on page 39).
3 On the Actions menu, click Create RAID Volume From Existing Hard Drive to launch the Migration
Wizard.
4 Click Next on the first Migration Wizard screen.
44
Optimizing Performance
®
Storage Utility.
®
Storage Utility.