Yoshimura 070BG131001 Quick Start Manual

Fender eliminator kit yamaha fz-10

Download this manual

RESEARCH&DEVELOPMENT OF AMERICA, INC.

5420 DANIELS STREET STE A, CHINO CA., 91710 · (800) 634-9166 · (909) 628-4722 · FAX (909) 591-2198

www.yoshimura-rd.com

FENDER ELIMINATOR KIT

070BG131001

Yamaha FZ-10

THIS PRODUCT IS NOT DOT APPROVED.

Yoshimura R&D of America, Inc. is not liable or responsible for any resulting event caused by the

installation of this product. Check with local laws and regulations for compliance prior to

installation and use. This product is not intended for use on public highways.

Need help?

Do you have a question about the 070BG131001 and is the answer not in the manual?

Page 1 Yamaha FZ-10 THIS PRODUCT IS NOT DOT APPROVED. Yoshimura R&D of America, Inc. is not liable or responsible for any resulting event caused by the installation of this product. Check with local laws and regulations for compliance prior to installation and use. This product is not intended for use on public highways.
Page 2 6mm Nylon Lock Nut BN-SSS-22-18 Butt Connectors ZT-300 Cable Ties 17029 Yoshimura Sticker Sheet Optional Parts 070BGUNVTBKT Universal Turn Signal Bracket Kit *** The Yoshimura Universal Turn Signal Bracket Kit is to be used with aftermarket stud-mounted turn signals and is sold separately.
Page 3 Be sure to cut at least a 6” section of wire from the connector. Installation 1. Install (No. 3) 070BG-LH-K1, Yoshimura license plate light onto (No. 2) 12200-FEBKT, Yoshimura license plate bracket using (No. 7) M4X6BHS, 4mm button head screws provided 5.
Page 4 c) Making sure that the stripped ends are centered, heat the center of the butt connector evenly until the solder begins to liquify. d) Allow to cool completely and tug both ends of the wires to verify that connection is secured. Scan for link to butt connector instruction video.