Page 1
Keep all stock parts from your existing system as some components may be necessary to install your new Yoshimura exhaust depending on the application. Read through all instructions before beginning installation. Exhaust system can be extremely hot.
3. Install (No. 2) 13710-421D, tailpipe inlet onto remove the stock muffler assembly. (No. 1) 13710-401D, header outlet. Note: The stock muffler mount bolt, washer, and nut will be re-used with the Yoshimura system. 3. Remove the skid plate bolts and carefully remove the stock skid plate.
Page 4
If any problem is found, please carefully follow through the installation steps again. If problem still persists, please call Yoshimura Tech Department at (800) 634-9166 / in CA (909) 628-4722. 11. It is recommended that the muffler and tailpipe be wiped down with rubbing alcohol to remove oil and fingerprints.
Dear Yoshimura Customer, Congratulations and thank you for purchasing a Yoshimura Exhaust System. Over six decades of experience in research and development, state of the art machinery, materials and craftsmanship of the highest quality all come together in a product of exceptional quality and performance—in other words, this is the best thing you can put on your bike.
Page 6
When you are performing periodic maintenance on your vehicle (like a tire change, or an oil change) you can remove your Yoshimura muffler from the vehicle and weigh it again.
Page 7
(found on header and tail-pipe components). 6. Also, feel free to ask through online e-mail at sales@yoshimura-rd.com, or fax your question/problems to (909) 591- 2198. To obtain technical information directly from Yoshimura, call (909) 628-4722.