Advertisement
Quick Links
RESEARCH&DEVELOPMENT OF AMERICA, INC.
5420 DANIELS STREET STE A, CHINO CA., 91710 · (800) 634-9166 · (909) 628-4722 · FAX (909) 591-2198
www.yoshimura-rd.com
FENDER ELIMINATOR KIT
070BG139600
Yamaha XSR900
THIS PRODUCT IS NOT DOT APPROVED.
Yoshimura R&D of America, Inc. is not liable or responsible for any resulting event caused by the
!
!
installation of this product. Check with local laws and regulations for compliance prior to
installation and use. This product is not intended for use on public highways.
Advertisement
Related Manuals for Yoshimura 070BG139600
Summary of Contents for Yoshimura 070BG139600
- Page 1 Yamaha XSR900 THIS PRODUCT IS NOT DOT APPROVED. Yoshimura R&D of America, Inc. is not liable or responsible for any resulting event caused by the installation of this product. Check with local laws and regulations for compliance prior to installation and use. This product is not intended for use on public highways.
- Page 2 Yoshimura LED Rear Turn Signal Kit w/ Relay 070BGUNVTBKT Universal Turn Signal Bracket Kit ** Not shown on diagram. *** The Yoshimura Universal Turn Signal Bracket Kit is to be used with aftermarket stud-mounted turn signals and is sold separately.
- Page 3 Removal 1. Remove rider seat. 2. Remove the four bolts securing seat latch bracket and set aside seat bracket to access rear fender nuts. 3. Locate and disconnect brake/tail light, license plate light, and rear turn signal connectors. 4. While securely supporting the stock fender assembly, remove the four fender nuts and carefully remove the stock fender assembly 6.
- Page 4 13960-FEBKT, fender eliminator bracket using (No. 8) M6X10BHS, 6mm screws from underneath. 2. Using the BN-SSS-22-18, butt connectors provided in the kit, connect the Yoshimura license plate light wires to the stock license plate light wires as follows: Blue -to- Red Wire Black Wire -to- Black Wire 6.