Advertisement
Quick Links
RESEARCH&DEVELOPMENT OF AMERICA, INC.
5420 DANIELS STREET STE A, CHINO CA., 91710 · (800)634-9166 · (909)628-4722 · FACSIMILE (909)591-2198
www.yoshimura-rd.com
FENDER ELIMINATOR KIT
070BG131000
Yamaha FZ-10
THIS PRODUCT IS NOT DOT APPROVED.
Yoshimura R&D of America, Inc. is not liable or responsible for any resulting event caused by the
!
!
installation of this product. Check with local laws and regulations for compliance prior to
installation and use. This product is not intended for use on public highways.
Advertisement
Related Manuals for Yoshimura 070BG131000
Summary of Contents for Yoshimura 070BG131000
- Page 1 Yamaha FZ-10 THIS PRODUCT IS NOT DOT APPROVED. Yoshimura R&D of America, Inc. is not liable or responsible for any resulting event caused by the installation of this product. Check with local laws and regulations for compliance prior to installation and use. This product is not intended for use on public highways.
- Page 2 6mm Nylon Lock Nut 94785-01-ND Butt Connectors ZT-300 Cable Ties 17029 Yoshimura Sticker Sheet Optional Parts 070BGUNVTBKT Universal Turn Signal Bracket Kit *** The Yoshimura Universal Turn Signal Bracket Kit is to be used with aftermarket stud-mounted turn signals and is sold separately.
- Page 3 Be sure to cut at least a 6” section of wire from the connector. Installation 1. Install (No. 3) 070BG-LH-K, Yoshimura license plate light onto (No. 2) 12200-FEBKT, Yoshimura license plate bracket using (No. 7) M4X6BHS, 4mm button head screws provided 5.
- Page 4 7. Install (No. 5,6) 13630-TSBL/R-00, turn signal brackets and (No. 4) 070BG-LPF, license plate frame using the (No. 9,10) M6X16BHS and M6X14BHS, 6mm button head screws as shown below. 8. Route wires between the stock key hole cover and (No. 1) 13100-FEBKT, fender eliminator bracket and under the seat.