Table of Contents
Advertisement
en Shelf supports
WARNING ‒ Risk of fire!
Loose food remnants, fat and meat juices may catch
fire.
Before using the appliance, remove the worst of the
▶
food residues and remnants from the cooking com-
partment, heating elements and accessories.
Requirement: Read the information on cleaning
products.
→ "Cleaning products", Page 12
Clean the appliance using hot soapy water and a
1.
dish cloth.
For some surfaces, you can use alternative
‒
cleaning agents.
→ "Suitable cleaning agents", Page 12
Dry with a soft cloth.
2.
11.3 Cleaning self-cleaning surfaces in the
cooking compartment
The back wall in the cooking compartment is self-clean-
ing. The self-cleaning surfaces are coated with a por-
ous, matt ceramic layer and have a rough surface.
When the appliance is in operation, the self-cleaning
surfaces absorb splashes from baking, roasting or
grilling and break them down. If the self-cleaning sur-
faces no longer clean themselves adequately during
operation, heat up the cooking compartment specific-
ally to the right temperature.
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
12
Shelf supports
To clean the rails and the cooking compartment, or to
replace the rails, you can remove these.
12.1 Detaching the shelf supports
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Lift the rail forwards slightly
1.
Pull the whole rail to the front
2.
Clean the rail.
3.
→ "Cleaning products", Page 12
14
and detach it
.
and remove it.
If dark stains are visible on the self-cleaning sur-
▶
faces, heat up the cooking compartment.
Do not use oven cleaner or abrasive cleaning aids.
▶
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
Remove accessories and cookware from the cook-
1.
ing compartment.
Unhook the shelf supports and remove them from
2.
the cooking compartment.
Use a detergent solution and a soft cloth to remove
3.
heavy soiling:
– From the smooth enamel surfaces
– From the inside of the appliance door
– From the glass cover for the oven light
This prevents stains that cannot be removed.
Remove any objects from the cooking compartment.
4.
The cooking compartment must be empty.
Use the function selector to set 3D hot air.
5.
Use the temperature selector to set the maximum
6.
temperature.
a The appliance starts heating after a few seconds.
Switch off the appliance after one hour.
7.
Once the appliance has cooled down, wipe the
8.
cooking compartment with a damp cloth.
Note: Reddish marks may appear on the self-clean-
ing surfaces. This is residue from food. These spots
are not harmful and are not rust. These marks do
not impair the cleaning ability of the self-cleaning
surfaces.
Attach the shelf supports.
9.
12.2 Attaching the shelf supports
Notes
¡ The rails only fit on the right or left.
¡ For both rails, ensure that the curved rods are at the
front.
First, push the rail into the middle of the rear
1.
socket
until the rail rests against the cooking
compartment wall, and then push this back
Push the rail into the front socket
2.
also rests against the cooking compartment wall,
and then press this downwards
.
until the rail
.
Advertisement
Table of Contents
