Shelf Supports; Appliance Door - Siemens HB213AB 0 Series User Manual And Installation Instructions

Table of Contents

Advertisement

Symbol
Function
50–275
Temperature range
1, 2, 3
Grill settings
or
I, II, III
Heat-up indicator
The appliance indicates when it is heating up.
When the appliance is heating, the ⁠   symbol lights up
on the display. This symbol goes out when heating is
paused.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
when the symbol first goes out.
Note: Due to thermal inertia, the temperature displayed
may differ slightly from the actual temperature inside
the cooking compartment.
4.5 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.

Shelf supports

The shelf supports in the cooking compartment enable
you to place accessories at different heights.
→ "Accessories", Page 7
Your appliance has five shelf positions. The shelf posi-
tions are numbered from bottom to top.
Depending on the appliance, the shelf supports are fit-
ted with pull-out rails or clip-on pull-out rails. The pull-
out rails are fixed in place and cannot be removed. The
clip-on pull-out rails allow you to use them as you wish
at all free shelf positions.
5  Accessories
Use original accessories. These have been made espe-
cially for your appliance.
Note: Accessories may become deformed if they get
hot. Deformation has no effect on function. As the ac-
cessory cools down, it will regain its original shape.
Use
Set the temperature in the cooking compartment in °C.
Set the grill settings for Full-surface grill and Grill, small area (depending on
the appliance model).
1 = low
2 = medium
3 = high
You can remove the shelf supports, e. g. for cleaning.
→ "Shelf supports", Page 13
Lighting
The oven lamp lights up the cooking compartment.
With most types of heating and functions, the lighting
lights up during operation. When the function selector
is turned to bring operation to an end, the lighting goes
out.
The Oven light setting on the function selector can be
used to switch on the light without heating.
Note: The cooling fan also runs at position Oven light.
Cooling fan
The cooling fan switches on automatically during oper-
ation. The hot air escapes above the door.
ATTENTION!
Do not cover the ventilation slot above the appliance
door. The appliance overheats.
Ensure that the ventilation slots are unobstructed.
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.

Appliance door

If you open the appliance door during operation, the
operation continues.
The accessories supplied may differ depending on the
appliance model.
Accessories en
7

Advertisement

Table of Contents
loading

Table of Contents