Connection To Factory Head Unit And Monitor; Connection To The Picture Signal Cable - r.LiNK CI-RL3-C3D Manual

2.3. Connections to factory head-unit and monitor
Remove the factory head unit and monitor

2.3.1. Connection to the picture signal cable

Disconnect the factory picture signal cable's purple coloured female HSD+2 connector at the
rear-side of the head unit and connect it to the purple coloured HSD+2 connector
„TO LCD" of the video interface .
Connect the not-angled purple coloured female HSD+2 connector of the enclosed picture
signal cable to the previously become free purple coloured male HSD+2 connector of the
video interface.
Connect the angled female purple coloured HSD+2 connector opposite the picture signal
cable to the purple coloured male HSD+2 connector
Note: The colours of the HSD+2 connectors at monitor and head unit may vary.
Version 11.09.2019
„HU IN" of the video interface.
HW:CAM (V98) / (V20) CI-RL3-C3D