Table of Contents
Advertisement
2.5.
Connections to the head-unit
Remove head-unit.
Remove the female Quadlock connector of the vehicle harness from the rear of the
navigation computer.
Remove optical leads –if existing- from the female Quadlock connector of the vehicle
harness and insert them into the female Quadlock connector of Quadlock harness at
the same position.
Connect female Quadlock connector of vehicle harness to the male Quadlock
connector of Quadlock harness.
Connect female Quadlock connector of Quadlock harness to the male Quadlock
connector of the head-unit.
Deviation BMW i3: With installation in BMW i3 the PNP cable requires an extention to the
video interface, as its head unit is located in the rear of the vehicle.
The installation place of the video Interface remains in the front of the vehicle.
2.6.
Connecting peripheral devices
It is possible to connect an after-market rear-view camera, an after-market front camera and
an after-market AV-source to the video-interface.
Before final installation of the peripheral devices, we recommend a test-run of the
interface. Due to changes in the production of the vehicle manufacturer is always the
possibility of incompatibility.
Version 26.04.2021
HW CAM(V31)/(V71)
RL2-NBT
Advertisement
Table of Contents
