Connection To Quadlock - Can - r.LiNK CI-RL3-C3D Manual

2.3.2. Connection to Quadlock - CAN

Connect the female 10pin connector of the 10pin Power / CAN cable to the 10pin connector
of the video interface.
Remove the female 40pin Quadlock connector of the vehicle harness from the rear-side of
the head-unit and connect it to the male 40pin Quadlock connector of the Power / CAN
cable.
Connect the opposite female Quadlock connector of the Power / CAN cable to the previously
become free male Quadlock connector at the rear-side of the head unit.
Version 11.09.2019 HW:CAM (V98) / (V20) CI-RL3-C3D