Jetter AG
MR 5
MR 7
MR 10
MR 11
JVM-104-O15 User Manual
Parity
This register lets you set the parity of a character.
Property
Values
Value after reset
Tab. 27: Parity
Activating the serial interface
This register lets you activate the serial interface.
Property
Values
Value after reset
Tab. 28: Activating the serial interface
Sending buffer
The character that has to be sent must be entered into this register.
■
If the sending buffer is able to accommodate the character, it is entered into
this buffer. This character will be sent once all previously entered characters
have been sent.
■
Prior to sending characters from the application program, it must be checked
whether the sending buffer is able to accommodate characters. This can be
checked by reading out MR 11.
■
The sending buffer functions according to the FIFO principle. The first charac-
ter entered is sent first.
Property
Values
Type of access
Tab. 29: Sending buffer
Sending buffer filling level
This register shows how many characters the sending buffer accommodates.
There is space for 32,768 characters max. within the buffer.
Property
Values
Tab. 30: Sending buffer filling level
Description
0
None (no parity)
1
Odd parity
2
Even parity
3
1 (mark)
4
0 (space)
2
Description
0
The serial interface is inactive, no data can be re-
ceived/transmitted.
1
The serial interface is active, data can be re-
ceived/transmitted.
0
Description
0 ... 31
5 bits per character
0 ... 63
6 bits per character
0 ... 127
7 bits per character
0 ... 255
8 bits per character
Read
Character written last
Write access Sending a character
Description
0 ... 32,768
Programming | 7
29 / 60