Compatible Rack Hardware Configuration - Western Digital Ultrastar Data102 Installation Manual

Installation Guide
Figure 5: Installation, Servicing, and Removal
Attention: Do not install or remove the enclosure while it is populated with drives. The fully
populated enclosure exceeds the amount of weight that a team of two should lift.
1.4.1 Compatible Rack Hardware Configuration
The following table(s) list the approved rack hardware configurations for the Ultrastar Data102:
Table 7: Compatible Hardware Configuration 1
Parameter
Vendor CRENLO/EMCOR
Number EMCOR
Part
Number
Quantity
Table 8: Compatible Hardware Configuration 2
Parameter
Vendor AFCO/Legrand
Part
Number
Rack PDU (Vertical)
Server Technology
AS-160099-03
412-0761-11_STV-4501
(Drawing
412-0761-20_STV-4502
526121 Rev 5)
412-0761-23_STV-4503
1
Rack PDU (Vertical)
Server Technology
Options:
412-0761-11_STV-4501
1.4 Ultrastar Data102 Rack Requirements
PDU Mounting
Bracket
Server Technology
KIT-MBVPT-1B
(one kit per PDU)
2 2
PDU Mounting
Bracket
Server Technology
KIT-MB-40
1. Overview
Additional Mounting
Bracket Hardware
Various
4 x M6 x 16 Hex
Cap Screws
8 x M6 Fender
Washers
4 x M6 Hex Nut
with Nylon Lock
Varies
Additional Mounting
Bracket Hardware
Various
None
7