Table of Contents
Advertisement
Improper handling of the hand shower
If you pull the hand shower out beyond the maximum hose length or rip the hose, the automatic retraction
system of the hand shower may be damaged. Then hand shower will no longer automatically retract into the
housing.
1. Do not pull the hand shower beyond the maximum hose length.
1. Pull the hand shower at least 20 cm out of the parked position.
2. Hold the hand shower hose firmly.
3. Turn the front part of the hand shower to select the desired spray pattern.
Set the hand shower to
n
Set the hand shower to
n
If you do not turn the front part of the hand shower to one of the two spray patterns, water can drip from the
shower head.
1. Press the lever on the hand shower. The harder you press the lever, the stronger the water stream will be.
2. After use, let the hand shower slowly retract into the housing.
hand shower is clean before letting it retract into the housing.
4.13
Adjusting the unit height (optional)
If your unit has the height adjustment option, you can set the height of the unit on the display. This enables you to
improve the ergonomics of your workplace.
Objects have been placed under the height-adjustable stand or under the unit with height-adjustable feet
If there are objects underneath the height-adjustable stand or the unit with height-adjustable feet and you set
the unit height, the stand and the unit could be damaged.
1. Do not place objects under the height-adjustable stand or under the unit with height-adjustable feet.
1. Press the button in the menu bar:
2. If you want to move the unit higher, press and hold the button:
3. If you want to move the unit lower, press and hold the button:
Operating instructions
NOTICE
to select the jet spray pattern.
to select the spray pattern.
NOTICE
4 | How to work with the unit
CAUTION! Make sure that the hose of the
23 / 92
Advertisement
Table of Contents
